Estimate debt service coverage ratio for a rental loan.
DSCR loan calculator
Most DSCR lenders want a ratio of 1.0–1.25+. This is an estimate only — confirm terms directly with a lender.
A DSCR calculator measures whether a rental property’s rent covers its mortgage. For a 1–4 unit DSCR loan, you divide the property’s gross monthly rent by its monthly PITIA (principal, interest, property taxes, insurance and association dues). A result of 1.00 means rent exactly covers the payment; most DSCR lenders want 1.00 to 1.25 or higher, and 1.25 is the usual line for the best pricing.
DSCR loan calculator
Lender method: gross rent ÷ PITIA. Max loan solves for the largest loan whose PITIA keeps you at your target DSCR at the rate and structure entered. Lenders may use a different rent figure, add flood insurance or round differently. This is an estimate, not a loan offer.
Key takeaways
- Formula: DSCR = gross monthly rent ÷ monthly PITIA (1–4 units). Commercial and 5+ unit lenders use NOI ÷ annual debt service instead.
- Benchmarks: under 1.00 = rent short of payment; 1.00–1.19 = qualifies with many lenders; 1.25+ = typically the best rate and leverage.
- Rule of thumb from our model: at a 7% rate with 25% down, a rental needs monthly rent of about 0.65% of price for DSCR 1.00 and 0.81% for DSCR 1.25.
- Rate sensitivity: in our example, each 0.5-point rate change moves DSCR by roughly 0.05.
- Watch out: a lender DSCR ignores vacancy, management and repairs. Our 1.25 example covers only 0.95 of the payment once those are counted.
On this page
- How to use the calculator
- The DSCR formula
- Worked example
- What is a good DSCR?
- Which rent lenders use
- What’s in PITIA
- Lender DSCR vs real cash flow
- Rent-to-price benchmarks
- Max loan and rent needed
- Rate and down payment sensitivity
- 10 ways to raise your DSCR
- DSCR loan requirements
- DSCR vs other investor loans
- Common mistakes
- FAQ
How to use this DSCR calculator
The calculator follows the method most DSCR lenders use for 1–4 unit rentals. It takes about a minute:
- Enter monthly gross rent. Use the signed lease amount for an occupied property. For a vacant property or a purchase, use what similar homes nearby actually rent for, not the asking rents on listings.
- Enter the loan. Loan amount, rate and structure. Choose interest-only or 40-year to see how those structures change the ratio.
- Add taxes, insurance and HOA. Use the actual tax bill. For a purchase, check whether the county will reassess at your purchase price, because that often raises the bill. Get an insurance quote rather than guessing.
- Pick a target DSCR. Use 1.25 to see what it takes to reach top-tier pricing, or 1.00 to see the break-even point.
- Read the results. You’ll see your DSCR, the rent needed to hit 1.00 and your target, and the largest loan the rent supports at your target.
If you already have a lender’s PITIA quote, type it into the optional PITIA field. It overrides the loan inputs so your ratio matches the lender’s math exactly.
The DSCR formula: how lenders calculate it
DSCR stands for debt service coverage ratio. It compares the income a property produces with the debt payments it has to carry. Two versions are in common use, and choosing the wrong one is the most frequent reason an investor’s number doesn’t match the lender’s.
1–4 unit residential rentals (DSCR loans)
DSCR = Gross monthly rent ÷ (Principal + Interest + Taxes + Insurance + Association dues)
This is a gross-income test. The lender does not subtract vacancy, repairs, management or utilities, so the ratio is quick to calculate and easy to compare across lenders. That simplicity is why it’s used for single-family homes, condos, townhomes and 2–4 unit properties.
Commercial and 5+ unit multifamily
DSCR = Net operating income (annual) ÷ Annual debt service
Commercial underwriters first build NOI: gross rents, minus a vacancy allowance, minus operating expenses (taxes, insurance, repairs, management, utilities, reserves). Then they divide by a full year of principal and interest. Because expenses are already removed, a 1.25 commercial DSCR is a stricter standard than a 1.25 residential DSCR.
Worked example: a $285,000 single-family rental
Here is the calculation behind the default numbers in the calculator, step by step.
| Line item | Assumption | Monthly amount |
|---|---|---|
| Purchase price | $285,000 | — |
| Loan amount | 75% LTV (25% down) | $213,750 loan |
| Principal & interest | 7.25%, 30-year fixed | $1,458.15 |
| Property tax | $3,420 per year | $285.00 |
| Insurance | $1,560 per year | $130.00 |
| HOA | None | $0.00 |
| PITIA | $1,873.15 | |
| Gross rent | Signed lease | $2,350.00 |
| DSCR | $2,350 ÷ $1,873.15 | 1.25 |
At 1.25, this property just clears the threshold most lenders use for their best pricing. Rent could fall to $1,873 before DSCR drops to 1.00, and it needs at least $2,341 to stay at 1.25. That’s only $9 below the current rent, so the deal has almost no room at the top tier. A $100-a-year higher insurance quote would push it into the next pricing band.
What is a good DSCR for a rental property?
A good DSCR for a residential rental is 1.25 or higher. That level typically gets the lowest rate and the most leverage. Ratios between 1.00 and 1.24 qualify with many lenders, usually with a rate premium or a lower maximum loan-to-value. Below 1.00 the rent does not cover the payment. Some lenders still offer “sub-1.0” or “no-ratio” programs, but they require more down, more reserves and a higher rate.
| DSCR range | What it means | Typical lender response |
|---|---|---|
| 1.50+ | Rent exceeds PITIA by 50% or more | Strongest pricing; often the most flexible on credit and LTV |
| 1.25–1.49 | Comfortable coverage | Best-tier pricing at most lenders; highest LTVs available |
| 1.00–1.24 | Rent covers PITIA with a thin cushion | Approvable at most lenders; rate add-ons common below 1.20 |
| 0.75–0.99 | Rent falls short of PITIA | Sub-1.0 programs only; lower LTV, larger reserves, no first-time investors at some lenders |
| Below 0.75 / no ratio | Rent not used to qualify | Specialty “no-ratio” programs; strong credit and equity required |
Which rent number lenders actually use
The rent figure has more effect on your DSCR than any other input, and it’s often the one where your numbers and the lender’s differ most. Lenders rarely accept your projection as-is. They take rent from one of these sources:
- Appraiser’s market rent. For a single-family home, the appraiser completes Fannie Mae Form 1007 (Single-Family Comparable Rent Schedule). For 2–4 units, the rent analysis is part of Form 1025. This is the default for purchases and vacant properties.
- Lease vs. market — usually the lower. On an occupied property, most lenders use the lower of the signed lease and the appraiser’s market rent. Some will use a higher lease amount, often capped at a percentage of market rent, if you can show two or three months of deposits.
- Short-term rental income. Lenders that accept Airbnb or VRBO income typically want 12 months of booking history or a third-party revenue projection. Many apply a discount or expense factor to it, and STR files often require a higher DSCR, a lower LTV or more reserves.
- Multi-unit properties. Rent for every unit is added together, including units that are vacant at closing, usually at the appraiser’s market rate.
Tip: Before you make an offer, pull three or four leased comparables (not listings) within about a mile and of similar bed/bath count and condition. If your projected rent is above the middle of that range, run the calculator with the lower number. That’s closer to what the appraiser is likely to support.
What’s in PITIA, and what isn’t
| Included in PITIA | Not included in lender DSCR |
|---|---|
| Principal and interest on the new loan (or interest only, if the loan is interest-only) | Vacancy and credit loss |
| Property taxes, often at the reassessed purchase value | Property management fees |
| Hazard insurance, plus flood insurance if the property is in a flood zone | Repairs, maintenance, capital expenditures |
| HOA, condo or other association dues, and some lenders include ground rent | Utilities the owner pays, lawn care, pest control, leasing fees |
Escrows are calculated the same way whether or not you escrow. If you pay taxes and insurance yourself, the lender still adds them to PITIA.
Lender DSCR vs. real cash flow: why 1.25 can mean 0.95
The lender’s DSCR answers one question: does rent cover the payment? It doesn’t tell you whether the investment makes money. Using the worked example above, here is what happens when ordinary operating costs are added:
| Item | Assumption | Monthly |
|---|---|---|
| Gross rent | Lease | $2,350.00 |
| Vacancy | 6% of rent (about 3 weeks a year) | −$141.00 |
| Management | 9% of collected rent | −$198.81 |
| Maintenance + capex reserve | 10% of rent | −$235.00 |
| Cash available for debt | $1,775.19 | |
| PITIA | $1,873.15 | |
| Real-world coverage | $1,775.19 ÷ $1,873.15 | 0.95 |
| Monthly cash flow | Lender view vs. real view | +$476.85 vs. −$97.96 |
The rule we use at Property3i: if a deal needs a lender DSCR above about 1.30 to break even after operating costs, it’s a financing approval, not an investment. Self-managing, newer construction and lower turnover all move the real-world number closer to the lender’s. Older homes and frequent turnover push it further apart. To see the full deal picture, run the property through our free Deal Score calculator.
Rent-to-price benchmarks: the rent a property needs to qualify
To screen listings before you open a calculator, we modeled the monthly rent needed per dollar of purchase price to hit DSCR 1.00 and 1.25 at different interest rates. Assumptions: 25% down, 30-year fixed, property tax of 1.2% of value per year, insurance of 0.6% of value per year, no HOA.
| Interest rate | Rent needed for DSCR 1.00 | Rent needed for DSCR 1.25 | On a $300,000 home (1.00 / 1.25) |
|---|---|---|---|
| 6.0% | 0.60% of price | 0.75% of price | $1,799 / $2,249 |
| 6.5% | 0.62% of price | 0.78% of price | $1,872 / $2,340 |
| 7.0% | 0.65% of price | 0.81% of price | $1,947 / $2,434 |
| 7.5% | 0.67% of price | 0.84% of price | $2,023 / $2,529 |
| 8.0% | 0.70% of price | 0.88% of price | $2,101 / $2,626 |
Here’s how to read it. At around 7%, a property renting for 0.8% of its price per month lands close to DSCR 1.25. The well-known “1% rule” isn’t required to qualify for a DSCR loan, but properties below about 0.65% will struggle to reach 1.00 unless you put more down or use an interest-only structure. In states with high property taxes or high insurance costs, such as parts of Texas, Florida, Illinois and New Jersey, add roughly 0.05 to 0.10 points to these thresholds.
Reverse the math: maximum loan and rent needed
Lenders often work backwards, starting from the rent and solving for the loan. You can do the same.
Rent needed to reach a target DSCR
Rent needed = PITIA × Target DSCR
Example: $1,873.15 × 1.25 = $2,341.
Maximum loan the rent supports
Max P&I = (Rent ÷ Target DSCR) − Taxes − Insurance − HOA
Max loan = Max P&I × [1 − (1 + r)^−n] ÷ r (r = monthly rate, n = months)
Example: ($2,350 ÷ 1.25) − $285 − $130 = $1,465 of P&I. At 7.25% over 360 months, that supports a loan of about $214,754. Lenders cap the loan at the lower of this figure and their maximum LTV.
Comparing it with the LTV limit tells you which constraint is binding. If the DSCR-based maximum is lower than 75% of the price, rent is the limit, and a bigger down payment is the only way in. If it’s higher, LTV is the limit and you have room in the ratio.
How rate and down payment move your DSCR
Same property, same $2,350 rent, same taxes and insurance. Only the rate or the loan size changes:
| Interest rate (75% LTV) | PITIA | DSCR |
|---|---|---|
| 6.00% | $1,696.54 | 1.39 |
| 6.50% | $1,766.05 | 1.33 |
| 7.00% | $1,837.08 | 1.28 |
| 7.25% | $1,873.15 | 1.25 |
| 7.50% | $1,909.57 | 1.23 |
| 8.00% | $1,983.42 | 1.18 |
| 8.50% | $2,058.55 | 1.14 |
| Down payment (7.25%) | Loan | PITIA | DSCR |
|---|---|---|---|
| 20% (80% LTV) | $228,000 | $1,970.36 | 1.19 |
| 25% (75% LTV) | $213,750 | $1,873.15 | 1.25 |
| 30% (70% LTV) | $199,500 | $1,775.94 | 1.32 |
| 35% (65% LTV) | $185,250 | $1,678.73 | 1.40 |
The pattern is consistent: in this example each half-point of rate is worth about 0.05 of DSCR, and each extra 5% down is worth about 0.06 to 0.08. This is why a rate buydown and a larger down payment can rescue the same borderline deal. Compare the cost of each before choosing.
10 ways to raise your DSCR
- Choose interest-only. With interest-only payments, our example’s payment drops from $1,458 to $1,291 and DSCR rises from 1.25 to 1.38. Lenders generally still require the loan to amortize after the IO period.
- Choose a 40-year term. Our example goes from 1.25 to 1.32. You’ll pay more interest over the life of the loan, so weigh that against the better ratio.
- Buy down the rate. Points paid at closing lower P&I. Compare what each point costs with how long you expect to keep the loan.
- Put more down. 30% down instead of 25% lifts the example from 1.25 to 1.32.
- Shop insurance hard. Insurance is the fastest-growing piece of PITIA in many coastal and storm-prone states. Every $100 a month you save adds about 0.07 to our example’s DSCR.
- Check the tax projection. Ask the lender whether they use the current tax bill or a reassessed amount. If the reassessed value is too high, appeal it after you close.
- Document market rent. Give the appraiser your leased comps. A $100 higher rent figure adds about 0.05.
- Raise below-market leases before you refinance. A tenant paying $250 under market is costing you DSCR as well as income.
- Add rentable space. A legal ADU, a basement unit or an added bedroom can change the rent comps the appraiser uses.
- Accept a prepayment penalty. Many DSCR lenders price lower with a 3- to 5-year step-down prepay. Make sure that fits your exit plan.
DSCR loan requirements beyond the ratio
A DSCR loan qualifies the property on its rent rather than on your personal income, so lenders generally don’t ask for tax returns, W-2s or a debt-to-income calculation. They do look at the rest of the file. Typical 2026 ranges look like this, though they vary more between lenders than almost any other loan type:
| Requirement | Common range | Notes |
|---|---|---|
| Minimum DSCR | 1.00–1.25 | Sub-1.0 and no-ratio programs exist with tighter terms |
| Credit score | 620–680 minimum | Best pricing usually at 720–740+ |
| Down payment / LTV | 20–25% down (75–80% LTV) on purchases | Cash-out refinances commonly cap at 70–75% LTV |
| Reserves | Often 3–6 months of PITIA | More for sub-1.0, STR, or large portfolios |
| Property types | 1–4 units, condos, townhomes; some allow STRs and 5–8 units | Must be non-owner-occupied and in rentable condition |
| Borrower | Individual or LLC | LLC borrowers usually sign a personal guarantee |
| Prepayment penalty | Often 0–5 years, step-down | Longer prepay typically means a lower rate |
| Cash-out seasoning | Frequently 3–12 months of ownership | Varies; shorter seasoning may use purchase price, not appraisal |
Because DSCR loans are business-purpose loans, they generally fall outside the consumer ability-to-repay rules that govern owner-occupied mortgages. That’s why the property’s income can replace your personal income documentation. Property3i isn’t a lender. Before you apply, check any lender’s licensing (NMLS, or state DRE/CFL where relevant) and compare written quotes.
DSCR loans vs. other investor financing
| DSCR loan | Conventional investment loan | Hard money loan | Bridge loan | |
|---|---|---|---|---|
| Qualifies on | Property rent (DSCR) | Personal income & DTI | Property value / ARV | Property value & exit plan |
| Typical term | 30 years (also 40-yr, IO) | 15–30 years | 6–24 months | 6–36 months |
| Best for | Stabilized rentals, self-employed, LLC owners | W-2 investors with few financed properties | Fix-and-flip, heavy rehab | Short-term gaps, lease-up |
| Speed | Moderate | Slowest | Fastest | Fast |
| Calculator | This page | — | Hard money calculator | Bridge loan calculator |
A common strategy for value-add deals: buy and renovate with a hard money loan, lease the property, then refinance into a DSCR loan once rents are in place. Estimate the after-repair value with our ARV calculator and budget the work with the rehab cost calculator. Then come back here with the stabilized rent to check that the refinance works.
Common DSCR calculation mistakes
- Using listing rents instead of leased comps. Asking rents are often 5–10% above what tenants actually sign for.
- Using the seller’s tax bill. After a sale, many counties reassess the property, sometimes sharply.
- Forgetting flood insurance or HOA dues. Both go into PITIA.
- Mixing the formulas. Using NOI on a residential DSCR loan understates your ratio. Using gross rent on a commercial deal overstates it.
- Treating 1.00 as safe. At 1.00, any vacancy or repair comes out of your own pocket.
- Skipping the rate stress test. If your rate isn’t locked, recalculate at 0.5 points higher before you commit.
DSCR calculator FAQ
What is a good DSCR for a rental property?
For a 1–4 unit rental, 1.25 or higher is considered good because it typically gets the best rate and the highest loan-to-value. Ratios from 1.00 to 1.24 qualify with many DSCR lenders at slightly higher pricing. Below 1.00 the rent does not cover the payment, and only sub-1.0 or no-ratio programs will lend.
How do you calculate DSCR for a DSCR loan?
Divide the property’s gross monthly rent by its monthly PITIA, which is principal, interest, property taxes, insurance and association dues. For example, $2,350 in rent divided by $1,873.15 in PITIA gives a DSCR of 1.25. Commercial and 5+ unit lenders instead divide annual net operating income by annual debt service.
What is included in PITIA?
PITIA includes principal, interest, property taxes, hazard insurance (plus flood insurance if required) and HOA or association dues. It does not include vacancy, management fees, repairs, capital expenditures or utilities, which is why a lender’s DSCR is higher than a property’s true cash-flow coverage.
Can I get a DSCR loan with a ratio below 1.0?
Yes, some lenders offer sub-1.0 DSCR programs, often down to about 0.75, as well as no-ratio programs that don’t use rent to qualify. Expect a lower maximum LTV, more months of reserves, a higher rate and a stronger credit requirement. Many lenders also exclude first-time investors and short-term rentals from these programs.
Do lenders use the lease rent or the market rent?
For a purchase or a vacant property, lenders use the appraiser’s market rent from Form 1007 (single-family) or Form 1025 (2–4 units). For an occupied property, most lenders use the lower of the signed lease and the market rent. Some accept a higher lease amount with proof of several months of rent deposits.
Does a DSCR loan require tax returns or proof of income?
Generally no. DSCR loans qualify the property on its rental income, so lenders usually don’t require tax returns, W-2s, pay stubs or a debt-to-income ratio. They still check credit, assets for the down payment and reserves, the appraisal, and the borrowing entity’s documents if you buy in an LLC.
Can I use Airbnb or short-term rental income for a DSCR loan?
Many DSCR lenders accept short-term rental income, usually backed by 12 months of booking history or a third-party revenue projection for the property. Lenders often discount STR income and may require a higher DSCR, more reserves or a lower LTV than for a long-term rental.
How much can I borrow on a DSCR loan?
Your maximum loan is the lower of two limits: the lender’s maximum LTV (often 75–80% on a purchase) and the largest loan the rent supports at the lender’s minimum DSCR. Use the “max loan at target DSCR” result in the calculator above to find the second limit.
Does an interest-only DSCR loan improve the ratio?
Yes. Interest-only payments are lower than amortizing payments, so the same rent produces a higher DSCR. In our worked example, switching from a 30-year amortizing loan to interest-only raises DSCR from 1.25 to 1.38. Lenders generally qualify on the interest-only payment during the IO period.
What credit score do I need for a DSCR loan?
Most DSCR lenders set a minimum between 620 and 680, and the best pricing usually starts around 720 to 740. A lower score may be offset by a higher DSCR, a larger down payment or more reserves.
How much down payment does a DSCR loan require?
Most DSCR purchase loans require 20–25% down. A few lenders go to 15% down for strong files, while sub-1.0 DSCR deals or lower credit scores often require 30–35% down.
Is DSCR the same as cash flow?
No. DSCR is a ratio of gross rent to the debt payment, while cash flow is what’s left after every expense. A property with a lender DSCR of 1.25 can still have negative cash flow once vacancy, management and maintenance are included. In our example, a 1.25 DSCR works out to about 0.95 real-world coverage.
What rent-to-price ratio do I need to qualify for a DSCR loan?
At about a 7% interest rate with 25% down, average taxes and average insurance, a property needs monthly rent of roughly 0.65% of the purchase price to reach DSCR 1.00, and about 0.81% to reach 1.25. High-tax or high-insurance areas need more.
Methodology and sources
All calculations on this page use standard amortization math (monthly payment = L × r ÷ [1 − (1 + r)−n]). The worked example, sensitivity tables and rent-to-price benchmarks are original Property3i models built on the assumptions stated with each table. Lending requirement ranges reflect a review of publicly posted DSCR program guidelines from multiple non-QM and investor lenders as of November 2026. Rent-schedule references are to Fannie Mae appraisal Forms 1007 and 1025. Property3i is not a lender, broker or financial advisor. Results are estimates for education, and final terms come only from a licensed lender’s underwriting.